au optronics corporation product specification document version 0.1 1/3 m240hw01 v0 1. general description m240hw01 is a color active matrix liquid crystal di splay composed of a tft-lcd panel, a driver circuit , and backlight system. the screen format is intended to support the wuxga (1920(h) x 1080(v)) screen and 16.7m colors (rgb 6-bits + frc data). 1.1 display characteristics the following items are characteristics summary on the table under 25 condition: items unit specifications screen diagonal [mm] 611.32 (24.0? wide) active area [mm] 531.36 (h) x 298.89 (v) pixels h x v 1920 3(rgb) 1080 pixel pitch [um] 276.75 (per one triad) 276.75 pixel arrangement r.g.b. vertical stripe display mode tn mode, normally white white luminance [cd/m 2 ] 300(typ) contrast ratio 1000 : 1 (typ) optical responsetime [msec] 5 ms(typ) nominal input voltage vcc [volt] +5.0 (typ) power consumption [watt] 35 w (typ) weight [grams] 3330 (typ) physical size (h x v x d) [mm] 556.0 (w) x 323.0 (h ) x 16.65 (d) typ surface treatment anti-glare type, harness 3h support color 16.7m colors (rgb 6-bits + hifrc dat a) 6500k white point (cie x,y) (0.313,0.329) +/-0.03 auto adjustment auto color, size & phase temperature range operating storage (non-operating) [ o c] [ o c] 0 to +50 -20 to +60 rohs compliance rohs compliance tco ?03 compliance tco ?03 compliance www..net
au optronics corporation product specification document version 0.1 2/3 m240hw01 v0 1.2 optical characteristics the optical characteristics are measured under stab le conditions at 25 (room temperature): item unit conditions min. typ. max. horizontal (r+l) cr = 10 150 170 - viewing angle [degree] vertical (u+d) cr = 10 140 160 - luminance uniformity [%] 9 points 75 80 - rising - 3.8 6.1 falling - 1.2 1.9 rising + falling - 5 8 optical response time [msec] grey to grey (avg.) - 2 - red x tbd tbd tbd red y tbd tbd tbd green x tbd tbd tbd green y tbd tbd tbd blue x tbd tbd tbd blue y tbd tbd tbd white x tbd tbd tbd color / chromaticity coordinates (cie 1931) white y tbd tbd tbd white luminance (at ccfl= 7.5ma) [cd/m 2 ] 240 300 - contrast ratio 600 1000 - cross talk (at 75hz) [%] - - 1.5 flicker [db] - - -20 www..net
au optronics corporation product specification document version 0.1 3/3 m240hw01 v0 2.1 backlight unit parameter guideline for ccfl inverter is under stab le conditions at 25 (room temperature): parameter min. typ. max. unit ccfl standard current(iscfl) 7.0 7.5 8.0 [ma] rms ccfl operation current(ircfl) 3.0 7.5 8.0 [ma] rms ccfl frequency(fcfl) tbd [khz] ccfl ignition voltage(vicfl, ta= 0 ) tbd [volt] rms ccfl ignition voltage(vicf, ta= 25 ) tbd [volt] rms ccfl operation voltage (vcfl) tbd [volt] rms ccfl power consumption(pcfl) tbd [watt] ccfl life time(ltcfl) 40,000 50,000 - [hour] pwm dimming ratio 20 100 % 2.2 pin assignment pin# signal name pin# signal name 1 rxoin0- 2 rxoin0+ 3 rxoin1- 4 rxoin1+ 5 rxoin2- 6 rxoin2+ 7 gnd 8 rxoclkin- 9 rxoclkin+ 10 rxoin3- 11 rxoin3+ 12 rxein0- 13 rxein0+ 14 gnd 15 rxein1- 16 rxein1+ 17 gnd 18 rxein2- 19 rxein2+ 20 rxeclkin- 21 rxeclkin+ 22 rxein3- 23 rxein3+ 24 gnd 25 nc 26 nc 27 v dd 28 v dd 29 v dd 30 v dd www..net
|